Your best bet is to look at a wiring diagram.
I did this last year on a 350z and the moving of the seat is simple, it needs a live and earth. I know it's a different car, but I'm sure the principle is the same.
The heater was a different story requiring relays.
It is possible though.
fitting full leather scirocco r seats in my 2.0 fsi
-
Roy_01
- Posts: 1703
- Joined: Sat Dec 27, 2014 6:51 pm
- I drive a: 2.0 TDI 140
- In: Sumatra
- With a: DSG box
Re: fitting full leather scirocco r seats in my 2.0 fsi
The heating also needs just wiring, the control module is under the driver seat.
You can buy a loom on kufatec.de
You can buy a loom on kufatec.de