Im trying to put them led lights on...
How to remove?
-
Deniz94
- Posts: 86
- Joined: Tue Sep 08, 2015 8:27 pm
- I drive a: GT 2.0 TDI 140/150
- In: Candy White
- With a: Manual box
How to remove?
How the heck do you remove these? I tried 3 screwdrivers and none work...
Im trying to put them led lights on...
Im trying to put them led lights on...
-
Cuprabob
- Posts: 5036
- Joined: Sat Aug 07, 2010 2:31 pm
- I drive a: GT 2.0 TDI 170/184
- In: Rising Blue
- With a: Manual box
- Location: S/W Scotland
Re: How to remove?
You need a Torx driver or bit that's the correct size. A standard Philips or Posidrive screwdriver won't do.
The majority of the screws on VWs are Torx these days so probably worth investing in a set.
The majority of the screws on VWs are Torx these days so probably worth investing in a set.
-
blower
- Posts: 466
- Joined: Tue Oct 06, 2015 7:01 pm
- I drive a: 1.4 TSI 160
- In: Reflex Silver
- With a: DSG box
Re: How to remove?
They will be T30 Torx bolts.
As above, many torx screws on a VW, along with hex heads (allen), and spline (tripple square).
Also as the car is german, if you start doing work on it you will find they use unusual sized heads, usually requiring a hex bit, spanner or socket that you don't find in your socket set unless it has every single size possible!
As above, many torx screws on a VW, along with hex heads (allen), and spline (tripple square).
Also as the car is german, if you start doing work on it you will find they use unusual sized heads, usually requiring a hex bit, spanner or socket that you don't find in your socket set unless it has every single size possible!