Technical discussion such as Bluetooth, Sat-Nav, iPods, tyres, brakes, all that kind of stuff.
19JC
Posts: 4 Joined: Tue Aug 30, 2016 8:18 pm
I drive a: GT 2.0 TSI
In: Viper Green
With a: DSG box
Post
by 19JC » Wed Jun 07, 2017 1:33 pm
Hi Guys,
New on the forum and as the title says, would the RNS510 with Nav be a straight swap to replace the RCD510 unit in my rocco? Or if were to purchase the new head unit, would i need to purchase anything else to perform the swap?
Thanks for any help
Cuprabob
Posts: 5036 Joined: Sat Aug 07, 2010 2:31 pm
I drive a: GT 2.0 TDI 170/184
In: Rising Blue
With a: Manual box
Options: Panoramic Roof, 19" Black Luganos, Vienna Leather, Parking Sensors, DAB, Dynaudio, Bluetooth, Cruise, Folding Mirrors, Xenons
Location: S/W Scotland
Post
by Cuprabob » Wed Jun 07, 2017 1:51 pm
It's a straight swap but you may need some coding done using VCDS or Vagcom to have the sat nav info display on the MFD.
Obviously, you'll need a GPS antenna. The majority of people who retro-fit just locate it above the unit under the dash.
You'll also need the security code for the RNS510.
19JC
Posts: 4 Joined: Tue Aug 30, 2016 8:18 pm
I drive a: GT 2.0 TSI
In: Viper Green
With a: DSG box
Post
by 19JC » Wed Jun 07, 2017 1:56 pm
Cuprabob wrote: It's a straight swap but you may need some coding done using VCDS or Vagcom to have the sat nav info display on the MFD.
Obviously, you'll need a GPS antenna. The majority of people who retro-fit just locate it above the unit under the dash.
You'll also need the security code for the RNS510.
Nice one, thanks for the info/help