Scirocco Central

[youtube][/youtube]
[youtube][/youtube]
[youtube][/youtube]

PODI looks VERY nice. Any idea of the price for the parts and mounting? Yes it look very factory matched , the colors are 95% ,matched for price look the official site and the dealers in UK http://www.podi.ca/categories/gauge-packages/shop-vw/golf-gti-rabbit/mk6-2010-2014.html" onclick="w...

Yes, around 225hp

Rawcpoppa wrote:Great thread.
What RON gasoline are you using for the dyno figures?

100 octane fuel ,soon i will have new dyno plot

@gab's yes mate i am searching for a proper 8x18 ET35 Wheel . @essexandy . The Podi Boost Gauge it is for the Golf MK6 which is direct fit for Scirocco also , the wiring was pretty easy for me . The Adjustable BOV valve is from here : http://www.tmg-performance.com/en/proionta/skastres" onclick...

Hi everyone, I am a member in this wonderful community for 4 years , because I see that there is interest here in 1.4 TSI Engines, i decided to present my VW Scirocco 1.4 TSI-Stage 2 Factory Specs: 1.4 TSI 160hp CAVD Engine DSG7 DQ200 Dry Double Clutch Gearbox Candy White Sunroof Donington Wheels wi...

Blower
I drive my car in manual which use more 1st gear at traffic jam and not the second gear like in D mode.

Hello very known problem for DSG7/DQ200 Dry Double Clutch gearbox, at the end of 2011 VW has produced a new revision of the clutch pack with better materials , but it is not 100% solution becuase the Drive Mode Software is stupid and if you dont stop completely it will start with D2 , this is the re...

vw from 2009 untill today has change 4 different piston part no.
Dont read Lucifer's Guide , the most are not true .

it is the same engine, 160hp version has broken pistons due to compressor and wrong software !

the 122 and 160hp engines use the same engine block, same crankshaft,same connection rods, same piston, same cylinder head but with different camshafts , same injectors, same fuel pump etc etc . The only differences are the different turbo (the 160 use bigger turbo) and the 160 have a mechanical sup...

Forged Pistons as stock is probably the best idea for longevity of the engine but i don't think they would suit joe public very well since oil consumption would rise and the engine would sound like a bag of bolts on cold starts. With the correct forged pistons you will have not oil consumption or p...

Sorry to hear such a bad news...again:( Just check my thread here: http://www.sciroccocentral.co.uk/forum/viewtopic.php?f=2&t=14390" onclick="window.open(this.href);return false; I have experienced pretty much identical scenario with my Viper Green Roc in August 2013. Only one piston/...

go to VW Dealer for a Good Will

@ash.mtl Yes i use FG400 with Orange Buff n Shine Cutting Pad(not heavy cutting) and i still have some RDS and swirls . As said @xjay for 100% perfect paint you need a loooooooot of time. No my rocco is not full of swirl, is much much better than it was before , i can say 70-80% correction was achie...

Same here, with Menzerna FG400 (heavy cut) and with Buff n Shine Orange Cutting Pad i have again swirls . I think Scirocco's paint need a MF Cutting pad

And here is my vote : -MY2012 1.4 TSI 160hp CAVD Engine, 2nd Stage Tuned 248hp -340NM -Clutch Pack Replaced in 2014 at 20.000km the problem was Clutch Slipping at Gear Changes with full throttle and Clutch Slipping with 5th + Gear but the problem was not the clutch pack but the bad tuning on ECU (E-...

The rattle noise is different from the judder/shudder with 2nd gear . The rattle Noise is 100% Normal, all DQ200/DSG7 Gearboxes make rattle sound at rough road even when they are brand new . The Judder with 2nd gear is due to polish of the friction material in the K2 Clutch .The Rattle noise at roug...

http://www.tmg-performance.com/en/axeso ... arbon.html" onclick="window.open(this.href);return false;

maybe if you teardown the RNS510 and found at the motherboard where it take input signal and connected here?