2.0 tsi multiple cylinder misfire
Posted: Thu Jul 07, 2016 8:42 pm
I've just about got my car home after it started misfiring. I've got the following codes:
P0133 - Oxygen Sensor Circuit Slow Response (Bank1, Sensor1)
P0304 - Cylinder 4 misfire
P0301 - Cylinder 1 misfire
B2aaa
Spark plugs 2 and 3 are black, if i shine a light inside the chamber the piston looks black too. Plugs 1 / 4 are wet. I've swapped the coils around (didn't help) and swapped all of the plugs for another set of plugs. Once again 2 and 3 turned black after running the car on idle for about 20 seconds.
I have recently (about 5000 miles ago) changed the inlet manifold and cleaned the carbon off the valves. I also gave the tips of the injectors a clean.
What could be the potential causes? The misfire is constant.
I'm considering replacing the injectors, as it's two cylinders misfiring... I can't think of anything that would cause the 2 same cylinders to misfire regardless of changing coils / plugs.
I'm not an expert, so was wondering if anyone might know if there's anything else i could check before replacing injectors? as it's a fairly big job.
P0133 - Oxygen Sensor Circuit Slow Response (Bank1, Sensor1)
P0304 - Cylinder 4 misfire
P0301 - Cylinder 1 misfire
B2aaa
Spark plugs 2 and 3 are black, if i shine a light inside the chamber the piston looks black too. Plugs 1 / 4 are wet. I've swapped the coils around (didn't help) and swapped all of the plugs for another set of plugs. Once again 2 and 3 turned black after running the car on idle for about 20 seconds.
I have recently (about 5000 miles ago) changed the inlet manifold and cleaned the carbon off the valves. I also gave the tips of the injectors a clean.
What could be the potential causes? The misfire is constant.
I'm considering replacing the injectors, as it's two cylinders misfiring... I can't think of anything that would cause the 2 same cylinders to misfire regardless of changing coils / plugs.
I'm not an expert, so was wondering if anyone might know if there's anything else i could check before replacing injectors? as it's a fairly big job.