How To Make The Needles Sweep On Start Up
Note: This is NOT available on cars that are MY2009 with the red display, MY2010.0 - May 2009 to October 2009 or from MY2012.5 November 2012 onwards.
Want your car to do this on start up?
In VCDS -
- [17 - Instruments]
- [Coding - 07]
- [Long Coding Helper]
- Click on each of the Byte numbers in step 3) and you'll see the selectable options below.
- Check the box for "Gauge Test/Needle Sweep active"
- [Do It!]