Page 1 of 1

Help 2.0 TSI EML

Posted: Mon Dec 24, 2018 7:28 pm
by Tomrowland141
Hello everyone, I had the engine management light come on 3 weeks ago and some misfiring issues.
I rang the RAC to come see what the problem was because I'm clueless.
It came up with a intermittent misfire on cylinder one so I changed all four coil packs and all the spark plugs, I also changed the; oil filter, fuel filter and the air filter for good measure.
And even though I have fixed the misfire, the EML is still coming on with a intermittent misfire on cylinder one.
Can anyone help diagnose the problem so I can finally fix it?
Any help or suggestions would be massively appreciated!

Re: Help 2.0 TSI EML

Posted: Thu Dec 27, 2018 1:21 pm
by Paradox1
Could be anything.
Ideally you'd need to scan it and get the error code.

Could be injectors but its just guesswork without diagnosing

Re: Help 2.0 TSI EML

Posted: Thu Dec 27, 2018 3:02 pm
by Cuprabob
If you've reset the fault codes and the EML is coming back on and when scanned the cause is a misfire on cylinder 1. As you have changed the coilpack and the plug, it will either be the injector or due to low compression.