Page 1 of 1

Replacing Electronic Shock Absorbers

Posted: Wed Feb 07, 2018 8:35 pm
by Bubs101
Is it possible to install standard shock absorbers in place of electronic shock absorbers for a VW Scirocco 2 ltr. GT TDi 2010 model?

Re: Replacing Electronic Shock Absorbers

Posted: Fri Jan 03, 2020 6:17 pm
by Rocodile
Looking for the same. Did you find an answer?

Re: Replacing Electronic Shock Absorbers

Posted: Mon Jan 06, 2020 9:14 am
by Paradox1
I think it will physically fit but you will have the DCC light flashing as the plug wont be connected

Re: Replacing Electronic Shock Absorbers

Posted: Mon Jan 06, 2020 3:57 pm
by DJC013
Hello, no problem fitting normal shocks, you can uplug the switch so that it stops the flashing :yes:

Re: Replacing Electronic Shock Absorbers

Posted: Mon Mar 09, 2020 10:30 am
by Fordy80
I need to replace mine.will I get any error lights etc on the dash replacing with normal shocks?

Re: Replacing Electronic Shock Absorbers

Posted: Mon Mar 09, 2020 10:42 am
by Cuprabob
Fordy80 wrote:I need to replace mine.will I get any error lights etc on the dash replacing with normal shocks?
As well as the LED flashing on the switch, depending upon the year of the car, you may also get an error message in the cluster. If your car displays a message on the cluster when you change the settings then it will more than likely store an error message under the "vehicle status" menu and have it popnup with a ping everytime you start the car.

Re: Replacing Electronic Shock Absorbers

Posted: Mon Mar 09, 2020 3:40 pm
by Fordy80
Thanks for the reply. I decided to replace like for like in the end