Page 1 of 1
Can't access error codes
Posted: Mon Apr 10, 2017 12:24 pm
by Jonnie1989
hi, having a few issues with my Rocco ATM. My abs, traction control and steering light are up on the dash. I have tried the lock left lock right and drive at 10kph but that hasn't worked. I have also taken it to a garage and had it plugged in but he couldn't open the fault codes. I also bought a vagscanner and tried it myself and had the same problem. I have checked the fuses but don't really know where to look.. has anybody had the same issue? Or does anybody know how to fix this problem? Thanks in advance
Re: Can't access error codes
Posted: Tue Apr 11, 2017 9:23 am
by xjay1337
If you have warning lights on the dashboard you will certainly have some errors codes.
I would suggest getting a decent garage or finding someone local with VCDS/Vagcom to scan it for you.
I would imagine a wheel speed sensor or the wiring to it, or something similar.
Re: Can't access error codes
Posted: Wed Apr 12, 2017 2:53 pm
by Paradox1
I can scan your car for you. where are you?
Youd be better of with a full VAG com scan tbh
Re: Can't access error codes
Posted: Thu Apr 13, 2017 12:54 pm
by Jonnie1989
I'm in Huddersfield.. I've had it at proper garage and had it plugged in and it comes up with error codes he just can't open them up to delete them. I have experienced this problem before when I had an Astra and I had put a fuse back on the wrong place, it would show the code but couldn't do anything with it.
I have check all the fuses but not to sure which ones could be causing the problem