Scirocco Central

hy,

I have a strange voltage drop in car....It all started around when I Installed and turned on (with VCDS) passinger and drivers LED lights.

They work fine, very bright light and it looks awsome to me.

The problem is that my trunk button in the doors has stopped working(I can opet trunk with key only), my windows wont go down anymore by themself when I hold a bit longer the button, but I have to hold it all the time....

I did the autoscan wit VCDS, and there are some fault codes, not just for the doors, but also for the radio, abs, steering wheel.....common to all them is somekind of voltage lower limit exceeded....



Is it possible that my LED lights are drawing too much voltage so my other electric things are failing?

One thing I did wrong I admite, is that when I was working plugged in with vcds, my car battery died, and I had to charge it...

Next day I replaced the new baterry( I was atending anyway to do that), but the problem is still there......maybe when baterry died, somethin went wrong?

cars stars fine, and drives normally...,,,didnt check the fuses thou


Can you hel me with those fault codes?
Here is copy/paste of scan:

Tuesday,04,October,2016,19:21:26:49450
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 16.8.0.3
Data version: 20160803 DS255
http://www.Ross-Tech.com" onclick="window.open(this.href);return false;


VIN: WVWZZZ13ZBV033704 License Plate:


Chassis Type: 13 (7N0)
Scan: 01 03 08 09 15 16 17 19 25 42 44 46 52 56

VIN: WVWZZZ13ZBV033704

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: Malfunction 0010
16-Steering wheel -- Status: Malfunction 0010
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: Malfunction 0010
56-Radio -- Status: Malfunction 0010

-------------------------------------------------------------------------------
Address 01: Engine (J623-CAXA) Labels: 03C-906-016-CAX2.clb
Part No SW: 03C 906 016 BA HW: 03C 907 309 F
Component: 1.4l R4/4V TS H12 9065
Revision: LCH12--- Serial number:
Coding: 00190012000400000000
Shop #: WSC 08224 016 263172
ASAM Dataset: EV_ECM14TF0S1103C906016BA 001005
ROD: N/A
VCID: 5FCDC91A46FCB6BAF9-800A

No ASAM data for: "EV_ECM14TF0S1103C906016BA" (VW36)
No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BE HW: 1K0 907 379 BE
Component: ESP MK60EC1 H31 0108
Revision: 00H31001
Coding: 743B40F5492500FD2E1202E4921D0040310000
Shop #: WSC 00020 790 00000
VCID: 76E38CBEC10617F28A-8022

1 Fault Found:
00668 - Supply Voltage Terminal 30
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 1
Fault Frequency: 1
Reset counter: 126
Mileage: 63239 km
Time Indication: 0
Date: 2062.14.30
Time: 18:47:41

Freeze Frame:
Count: 7
Count: 3
Count: 28672
Count: 128
Count: 29696
Count: 0
Count: 256
Count: 0


-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 5K0-907-044.clb
Part No SW: 5K0 907 044 DT HW: 5K0 907 044 DT
Component: Climatronic H17 1010
Revision: 00003001
Coding: 0000000002
Shop #: WSC 00020 999 00000
ASAM Dataset: EV_Climatronic A01010
ROD: EV_ClimaAutoBasis_VW36.rod
VCID: 000FEA669BC22942A0-8054

1 Fault Found:
13635840 - Supply voltage
U1011 00 [008] - Voltage too Low
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Reset counter: 126
Mileage: 63239 km
Date: 2062.14.30
Time: 18:49:20


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
Part No SW: 5K0 937 086 J HW: 5K0 937 086 J
Component: BCM PQ35 M 011 0046
Revision: BC011001
Coding: 40180A3880250A00408000840000016E43003A88524D89605C8000000040
Shop #: WSC 00020 790 12345
VCID: 3B755D8ABAA48A9AB5-806E

Subsystem 1 - Part No SW: 1K8 955 119 F HW: 1K8 955 119 F
Component: Wischer 18011 10 0603
Coding: 009795

6 Faults Found:
00059 - Terminal 30 for Interior Lighting
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 1
Fault Frequency: 2
Reset counter: 142
Mileage: 63423 km
Time Indication: 0
Date: 2063.14.05
Time: 00:08:25

Freeze Frame:
Term 15 Off
Voltage: 12.35 V
OFF
ON
OFF
OFF
OFF

00446 - Function Limitation due to Under-Voltage
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 6
Fault Frequency: 7
Reset counter: 126
Mileage: 63239 km
Time Indication: 0
Date: 2062.14.30
Time: 18:45:00

Freeze Frame:
Term 15 On
Voltage: 8.90 V
ON
OFF
OFF
OFF
OFF

00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 4
Fault Frequency: 1
Reset counter: 126
Mileage: 63239 km
Time Indication: 0
Date: 2062.14.30
Time: 18:47:28

Freeze Frame:
Term 15 On
Voltage: 8.30 V
ON
OFF
OFF
OFF
OFF

01519 - Bulb for Back-Up Lights; Right (M17)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 126
Mileage: 63239 km
Time Indication: 0
Date: 2062.14.30
Time: 18:34:31

Freeze Frame:
Term 15 On
Voltage: 10.55 V
ON
ON
OFF
OFF
OFF

02394 - Parking Light Left Front (M1)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 6
Reset counter: 126
Mileage: 63239 km
Time Indication: 0
Date: 2062.14.30
Time: 18:09:29

Freeze Frame:
Term 15 On
Voltage: 11.45 V
ON
ON
OFF
OFF
OFF

02395 - Parking Light Front Right (M3)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 29
Reset counter: 142
Mileage: 63239 km
Time Indication: 0
Date: 2062.14.30
Time: 17:17:29

Freeze Frame:
Term 15 On
Voltage: 11.80 V
ON
ON
OFF
OFF
OFF


-------------------------------------------------------------------------------
Address 15: Airbags Labels: 1K0-909-605.lbl
Part No SW: 1K0 909 605 AE HW: 1K0 909 605 AE
Component: 0G AIRBAG VW8 020 2300
Revision: 05020000 Serial number: 003D1D03FMA.
Coding: 0012359
Shop #: WSC 00020 790 00000
VCID: 6FEDB9DA7E5C263A49-803A

Subsystem 1 - Serial number: 6332MSME5C2403524

Subsystem 2 - Serial number: 6342MSME5C2442214

Subsystem 3 - Serial number: 6352QSME080346604

Subsystem 4 - Serial number: 6362QSME7307104CC

1 Fault Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels: 5K0-953-569.clb
Part No SW: 5K0 953 521 BJ HW: 5K0 953 569 C
Component: LENKS.MODUL 014 0140
Revision: FF010040 Serial number: 20110310100699
Coding: 5080040000
Shop #: WSC 00020 999 00000
ASAM Dataset: EV_SMLSNGOVLWSXS A01004
ROD: N/A
VCID: 75E18BB2D4001CEA83-8020

No ASAM data for: "EV_SMLSNGOVLWSXS" (VW36 *)
2 Faults Found:
114178 - ROD - Unknown Error Code
- 00 [008]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 126
Mileage: 63239 km
Date: 2062.14.30
Time: 18:48:02

136194 - ROD - Unknown Error Code
- 00 [008]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 126
Mileage: 63239 km
Date: 2062.14.30
Time: 18:47:26


-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 1K8 920 862 HW: 1K8 920 862
Component: KOMBI H03 0405
Serial number: 00000000000000
Coding: 170900
Shop #: WSC 55240 123 104857
ASAM Dataset: EV_Okmbi_UDS_VDD_RM09 A04089
ROD: N/A
VCID: 6FEDB9DAB65C263A49-803A

No ASAM data for: "EV_Okmbi_UDS_VDD_RM09" (VW36 *)
No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: 7N0-907-530-V2.clb
Part No SW: 7N0 907 530 C HW: 1K0 907 951
Component: J533 Gateway H37 0614
Revision: H37 Serial number: 050311F1002072
Coding: 354000
Shop #: WSC 00020 790 00000
VCID: 306F7AA663E279C210-8064

2 Faults Found:
00469 - Infotainment Databus in Single Wire Operation
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 3
Fault Frequency: 1
Reset counter: 135
Mileage: 63373 km
Time Indication: 0
Date: 2063.14.04
Time: 11:21:41

00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 126
Mileage: 63239 km
Time Indication: 0
Date: 2062.14.30
Time: 18:46:38


-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H03 0405
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
VCID: 6ADBA8CE8DBEC3121E-803E

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 1Q0 959 701 H HW: 1Q0 959 701 H
Component: Tuer-SG 009 2129
Coding: 0000064
Shop #: WSC 00020 790 00000
VCID: 397947827098B88AA7-806C

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K0 909 144 M
Component: EPS_ZFLS Kl. 69 3201
Revision: 00H20000
Shop #: WSC 00020 790 00000
VCID: 346776B657FA45E274-8060

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX3.lbl
Part No SW: 1Q0 959 702 H HW: 1Q0 959 702 H
Component: Tuer-SG 009 2129
Coding: 0021366
Shop #: WSC 00020 790 00000
VCID: 3A7B588E759EB392AE-806E

1 Fault Found:
00132 - Outside Door Handle Illumination/mirror Light Passenger Side
012 - Electrical Fault in Circuit

-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels: 5M0-035-1xx-56.clb
Part No SW: 3C8 035 195 HW: 3C8 035 195
Component: RCD510 H16 5026
Revision: -----13S Serial number: VWZ4Z3L1116950
Coding: 0500040004
Shop #: WSC 00020 790 00000
VCID: 65C1DBF26CA0EC6A33-8030

1 Fault Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 126
Mileage: 0 km
Time Indication: 0
Date: 2062.14.30
Time: 18:44:28


End-------------------------(Elapsed Time: 01:54)--------------------------

How did you connect the wires? With scotch locks?
Sounds like a short circuit or bad connection.

I see you have replied to my other thread under "Lights", where you asked me why do I want to disable the lights?

Where there is your answer why:D

http://imageshack.com/a/img923/3151/qg5hZ5.jpg" onclick="window.open(this.href);return false;

You can see on this picuture how does the end of wire look like, I just put that end into the conector in the doors, following instructions on this forum from the other member who did the same thing and it works.

I think the connection is oke.....maybe if I disconnect all again and erase the faults, everything will be oke?

When my battery died, and I tried to charge it again, did that messed something up?

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 1Q0 959 701 H HW: 1Q0 959 701 H
Component: Tuer-SG 009 2129
Coding: 0000064
Shop #: WSC 00020 790 00000
VCID: 397947827098B88AA7-806C

No fault code found.

I think you need to check your coding for the drivers door. It looks like you changed it to 64 rather than adding 64 to the original value. This will give you the issues you are seeing with the boot lid switch, and possibly some issues with the mirror as well (heating, lighting, folding etc.).

As for the low voltage, did you have the interior lights and radio on while you fitted your new units? They may have been on long enough to cause the voltage drop that has been logged. If that's the case take it for a 15min drive to top up the battery then clear the faults.

edit: Just read that your battery died while coding. this is likely to be the cause of your voltage warnings as the car would have tried to turn off as many non-essential systems as possible to keep the battery going.

Damit......yes, I have erased the original coding and wrote 0000064.....

So what I had to do was just adding 0000064 to original code?(without zeros?)



this is the picture from other member here who was showing coding of those LED door lights....



cant remember the orginal coding, was 0021366 as in the picture original?

so the coding had to bi something like.......0021366+64(without +?, or with zeros?)

How do I return everthing back to normal hahahha?

As long as you haven't changed laptops since you did the original coding then you should have a log of all the changes made on your laptop. You'll need to find this folder I think by default its somewhere in c:\ross-tech\ (i'll check later) and get the original coding from there. Once you have that add 64 to the original number and code the module with the new number. That should get everything working properly in the door again.

Oke, I will look into it.....

And yes, its the same laptop...

isnt the original coding the same for all Sciroccos, or is it unique for each one?

They will be broadly similar, but it does depend on which options you have. You can have a reasonable guess by looking at the screenshot you posted above and then adding up the numbers for each option you have. I'd recommend looking for the original coding first though as there may be some undocumented values.

For example the code 21366 means the below features are installed:

Ambient Mirror Illumination installed
Mirror Turn Signals installed
Automatic Run active
Mirror Heating installed
Door Exit/Warning Light installed
Seat Memory AND/Or Mirror with Memory Function installed
Right Hand Steering
Folding Mirrors installed (MY 2008+)

I think I ve found something in some loging folder from vcds....

That first coding I did was on last monday as I remember.....and here is the first log in adrees 09 ever, and it was on that last monday:

Address 09,5K0 937 086 J,recoded (Long Coding),from,40180A3880250A00408000841000016643013A88524D89605C8000000040,to,40180A3880250A00408000841500016E43613A88524D89605C8000000040,(00020/790/00000),Monday,26,September,2016,18:50:22:49474


is this long coding............. "from,40180A3880250A00408000841000016643013A88524D89605C8000000040" my original code?

wensleydale wrote: Ambient Mirror Illumination installed
Mirror Turn Signals installed
Automatic Run active
Mirror Heating installed
Door Exit/Warning Light installed
Seat Memory AND/Or Mirror with Memory Function installed
Right Hand Steering
Folding Mirrors installed (MY 2008+)

these red things I dont have

what is automatic Run?

Komar wrote: what is automatic Run

Just a guess but it could be the one touch window operation.

Komar wrote:I think I ve found something in some loging folder from vcds....

That first coding I did was on last monday as I remember.....and here is the first log in adrees 09 ever, and it was on that last monday:

Address 09,5K0 937 086 J,recoded (Long Coding),from,40180A3880250A00408000841000016643013A88524D89605C8000000040,to,40180A3880250A00408000841500016E43613A88524D89605C8000000040,(00020/790/00000),Monday,26,September,2016,18:50:22:49474


is this long coding............. "from,40180A3880250A00408000841000016643013A88524D89605C8000000040" my original code?

Sounds like you've found the right file. Is there anything in there about address 52?

there only a log that I tried to change the 0000064 code to 21366 code......which did nothing ofc...


so I can copy that long code to window which is under the icon "long code helper" ?

In adress 9?

oke here is the funny thing......as I said, i have changed the 0000064 coding to 21366 as I thought that is orginal code. For the passinger door only.

what happined next, the window on only passinger site went up and down but the button was reverse!

and it go up and down without holding the button (probablly the automatic Run whic is in 21366 code

next thing was that the window wouldnt drop down a bit when you wanted to unlock or open the door of the car....


I return back the passinger side to 0000064 and its oke now.....but still the same problem with boot and they wont go down by themself when holdin a button a bit longer....


so it looks like the problem is really in coding as you sad before....

The coding is all in module 42 and 52, not in module 09.
Next time make a picture before you change anything

Komar wrote:oke here is the funny thing......as I said, i have changed the 0000064 coding to 21366 as I thought that is orginal code. For the passinger door only.

what happined next, the window on only passinger site went up and down but the button was reverse!

and it go up and down without holding the button (probablly the automatic Run whic is in 21366 code

next thing was that the window wouldnt drop down a bit when you wanted to unlock or open the door of the car....


I return back the passinger side to 0000064 and its oke now.....but still the same problem with boot and they wont go down by themself when holdin a button a bit longer....


so it looks like the problem is really in coding as you sad before....

OK, let's try and get this straightened out for you.
Driver and passenger doors will not necessarily have the same coding as each other.

You've already given me some information about what is and isn't fitted to your car, so we can have a go at rebuilding the coding.

Passenger door (module 52)
Mirror Turn Signals installed = 4
Automatic Run active = 16
Mirror Heating installed = 32
Door Exit/Warning Light installed = 64
Base coding (all the ones I've seen have this) = 16384 +
------------------------------------------------------------------
Total = 16500
-------------------------------------------------------------------
Can you try setting the coding of module 52 to 0016500 and let me know what features do and don't work.


Drivers door (module 42)
Rear Lid Remote Unlock Button (E233) = 1
Mirror Turn Signals = 4
Automatic Run active = 16
Mirror Heater installed = 32
Door Exit/Warning Light installed = 64
Base coding (all the ones I've seen have this) = 16384 +
--------------------------------------------------------------------
Total = 16501
--------------------------------------------------------------------
Can you try setting the coding of module 42 to 0016501 and let me know what features do and don't work.

hopefully that should get you most of the way there. If the steering wheel is on the right hand side of the car you will need to add 512 to both of those figures before coding them.

Let me know how you get on.

Oke, I understand what I have to do
Will try that..

And my steering wheel is on the left side.

Those codes should work for you then, let us know how you get on.

Yes, everything is working as it should now

thx very much guys, you have been very helpfull...

I have deleted all the faults and I will auto scan again after first drive, so we will see the scan then...


You can really mess things up with vcds if you dont know what are you doing
But, I have learned a lot about coding and stuff..

I'm glad to hear it's all working properly again. It's always a good idea to make a copy of the original values before you make a change then you can quickly put it back if things don't work as expected.