I started to work on the Quattro project...
Preparing for the AWD.





Open the second hole for the tank.

Covering the welding.




Close to finish.



Haldex installed and coded [emoji1360]


Then as all projects you should have a problem that complicate it [emoji116] [emoji57]
ABS error;

I checked similar project who had the same issue, but he changed the cluster from Scirocco and replaced by Golf R one.
Here is his comment[emoji116]
“However, the conversation gradually drew the attention to the fact that the ABS control device is so "crooked" that it listens the vehicle model / type code sent from the CAN bus to the instrument panel and does not encode the conflicting type code itself. That is, when the instrument panel claims a car to Scirocco, the ABS control device does not allow it to encode itself to Golf. And Scirocco can't be a four-wheel drive. On the instrument panel, that type is "hard-coded", but it cannot be changed by VCDS.”
I believe if the Scirocco instrument cluster changed from FWD to AWD then the ABS fault will disappear. I don’t know how yet but hopefully will figure it out, all support are more than welcome

Stay tuned, more is coming [emoji6]