Scirocco Central

Hi guys

I spoke to a mate of mine about fitting h&r springs to the R. he asked if i would need to reset the acc through a computer if he disconnects it to for the springs.

So my question is. Once he disconnects acc cable to fit the springs will i need to reset it through a computer or does it need to be reset at all...

Iv never lowerd my car etc so I wouldn't know. But what I do know is that the whole time iv been on this forum iv never seen that qquestion asked. So I would assume u dont need to do anything. But thats just a guess. Im sure somebody with actual knowledge of doing this will be along soon to correct me.

Cheers mate. Your right about noone asking that question. Hmmm

Sent from my ME371MG using Tapatalk

No you don't need to reset the ACC. I changed the springs on my R for H&R's and more recently the KW DDC coilovers. Just had a full geometry check afterwards, no other issues!

Thanks mate

Any news on the springs for me

Sent from my ME371MG using Tapatalk

I was right then .. surpose I had a 50/50 chance of getting it right

As long as the ignition isn't switched on while it's disconnected.then it won't know and won't log any faults so no is the answer