Interior Trim Removal

[SPEEDDRV]

Hello fellas,

Looking to change the air vent surrounds and hopefully the steering wheel silver parts.
I know already how to change the center console trim around radio and AC and all other trims. What I don't know is how to remove all four air vents. For the steering wheel silver parts, the one on the bottom just comes right off but the other two, is a pain in the a**!!

Can somebody please tell me how to remove the airbag without it to freaking EXPLODE?! I'm afraid!

Let's make it look like R, don't want the R badge tho, on the steering wheel. Just glossy black!

http://www.sciroccocentral.co.uk/forum/ ... 38&t=10148" onclick="window.open(this.href);return false;

[SPEEDDRV]

Any help on removing air vent trims? Already accomplished everything else... Only four air vent trims missing. Any idea on how to remove it?

[Kugaman1]

Hi mate, Im new to the forum as my wife just got a Rocco.

It seems pretty dead around here....maybe as the car has been out for quite a while, theres nothing left to talk about with it!

Anyway, if you look for posts on adding retrofit cruise control, they will tell you how to remove the airbag. Its very simple.

[VWBlue]

Could you post pics of the steering wheels and circle on the photo what you're trying to remove?

[SPEEDDRV]

Thanks for the replies guys. I think this is what I'm looking for. " onclick="window.open(this.href);return false;
Can somebody confirm that the proper way to remove airbag? What I don't understand is how to put it back.

[Kugaman1]

Ive not done it on a rocco, but did it on an Evoque I owned.

Its held in place by a spring clip that you press down to release.

You press it and at the same time give the airbag a light pull. You will know when youve got it as the airbag module kinda pops out.

Fitting is easy, just press back into position and you will hear the sping clips click into place.

[SPEEDDRV]

Thank you very much my friend. Sounds easy! Cheers