Hi,
Before you read, im inexperienced, so this is just a little project.
I'm basically just trying to put in a Bi xenon projector. I've got my bulbs wired into the two black wires in the headlight, but where do I put the projector for the low and high shutter?
What wire do I connect to the Bi Xenon projector?
-
- Posts: 4
- Joined: Fri Feb 08, 2019 3:50 pm
- I drive a: 2.0 TDI 140
- In: Candy White
- With a: Manual box
What wire do I connect to the Bi Xenon projector?
Last edited by luke5368 on Thu Apr 18, 2019 11:57 am, edited 1 time in total.
-
- Posts: 4
- Joined: Fri Feb 08, 2019 3:50 pm
- I drive a: 2.0 TDI 140
- In: Candy White
- With a: Manual box
Re: What wire do I connect to the Bi Xenon projector?
Just encase anyone was needing to know, I found out, you connect to the inner high beam light. Not the outside one because thats for your low beam, so you connect your bulb red and black to the outside black wires, then the projector to the black wires coming out of the high beam which is light the inside of the headlight.