Power mirror fold using the fob ? EDIT -You need Vag Can Pro

Technical discussion such as Bluetooth, Sat-Nav, iPods, tyres, brakes, all that kind of stuff.

Re: You want Power mirror fold using the fob ? I've sussed

Postby roccopanda » Wed Aug 24, 2016 8:37 am

Fair enough - thanks :) I'll see about actually sourcing/installing the powerfold mirrors in first, then I can try find someone to do the change.
roccopanda
 
Posts: 119
Joined: Wed Jul 17, 2013 3:47 pm
I drive a: GT 2.0 TDI 140/150
In: Indium Grey
With a: Manual box

Re: You want Power mirror fold using the fob ? I've sussed

Postby mvb12 » Wed Aug 24, 2016 12:15 pm

Is VAGCAN PRO A cheap/copy version of VAG COM / VCDS?
mvb12
 
Posts: 95
Joined: Mon Apr 18, 2016 6:31 pm
I drive a: Scirocco R
In: Pure White
With a: DSG box

Re: You want Power mirror fold using the fob ? I've sussed

Postby Roy_01 » Wed Aug 24, 2016 4:35 pm

No its a separate programm, with more programming functions.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1428
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: You want Power mirror fold using the fob ? I've sussed

Postby Springs » Tue Oct 25, 2016 6:01 pm

does anyone know if anything further came of this for more widestream use? would like to have this feature on my car if possible
User avatar
Springs
 
Posts: 75
Joined: Thu Aug 27, 2015 6:45 pm
I drive a: GT 2.0 TDI 170/184
In: Reflex Silver
With a: DSG box

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby uklee » Sun Oct 01, 2017 11:11 am

*** UPDATE***
Finally got this working on my 2013 Scirocco with retrofitted powerfold mirrors :clap:

The solution ? , go and see this guy and give him £20 :D

https://www.facebook.com/vwretrofit/

He's based in Redditch , West Midlands and is a bit of a whizz with VAG-Can-Pro (note this is NOT the same an VAG-COM / VCDS) . Using his laptop he can reprogramme the door mirror modules to perform mirror fold on the fob . It took him less than 10 minutes from start to finish outside his house , and he charges just £20.

two options are available when he reprograms the door modules (you have to choose one or the other)
1) CLOSE : Press & Hold the lock button for 3 seconds - this performs the standard 'global closing' feature and closes any open windows and the sunroof (where fitted) , and also folds the mirrors in.
OPEN : Press & Hold the lock button for 3 seconds - this performs the standard 'global opening' feature and opens any closed windows and the sunroof (where fitted) , and also folds the mirrors out.

2) CLOSE : Press & Hold the lock button for 3 seconds - this performs the standard 'global opening' feature and closes any open windows and the sunroof (where fitted) , and also folds the mirrors in.
OPEN : the mirrors will automatically fold out when the ignition is turned on. The standard 'global opening' feature remains unaffected and only closes the windows and the sunroof (where fitted) , The mirrors will not fold out by pressing the fob.


I went for option 2 , i reckon it'll be more practical and avoids faffing around holding the lock button , if you only want to pop into your locked car to retrieve your shopping / wallet whatever.

I'm really chuffed i've finally got this done and at last have found a solution that works. VAG-Can-Pro is a far more powerful tool than VAG-COM / VCDS .
Although VCDS is far more user friendly and can re-code modules is a well structured and more 'guided' way , it cant actually reprogram the module firmware like VAG-Can-Pro can.

Lee
User avatar
uklee
 
Posts: 667
Joined: Thu Jun 27, 2013 5:58 pm
Location: The Midlands , UK
I drive a: GTS TDI
In: Candy White
With a: Manual box
Options: 14MY GTS TDi 177 RNS510 DAB with Dynaudio ,Parking sensors, 90% tint, Bi-Xenons, Full colour MFC, Winter Pack. MODS- De-Striped ,Reverse Camera Kit ,Power-fold Mirrors, Smokers pack ,Cruise Control, VW Cup spoiler ,VAG-COM tweeks ,LED interior light kit ,MSS Streets suspension kit ,12mm spacers

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby Roy_01 » Sun Oct 01, 2017 11:36 am

Good job! Glad you finally found someone, you deserve it after all that nice DIY's.
I bet there are much people from this forum looking for this in the uk.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1428
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby denonamp » Sun Oct 01, 2017 3:41 pm

uklee wrote:*** UPDATE***
Finally got this working on my 2013 Scirocco with retrofitted powerfold mirrors :clap:

The solution ? , go and see this guy and give him £20 :D

https://www.facebook.com/vwretrofit/

He's based in Redditch , West Midlands and is a bit of a whizz with VAG-Can-Pro (note this is NOT the same an VAG-COM / VCDS) . Using his laptop he can reprogramme the door mirror modules to perform mirror fold on the fob . It took him less than 10 minutes from start to finish outside his house , and he charges just £20.

two options are available when he reprograms the door modules (you have to choose one or the other)
1) CLOSE : Press & Hold the lock button for 3 seconds - this performs the standard 'global closing' feature and closes any open windows and the sunroof (where fitted) , and also folds the mirrors in.
OPEN : Press & Hold the lock button for 3 seconds - this performs the standard 'global opening' feature and opens any closed windows and the sunroof (where fitted) , and also folds the mirrors out.

2) CLOSE : Press & Hold the lock button for 3 seconds - this performs the standard 'global opening' feature and closes any open windows and the sunroof (where fitted) , and also folds the mirrors in.
OPEN : the mirrors will automatically fold out when the ignition is turned on. The standard 'global opening' feature remains unaffected and only closes the windows and the sunroof (where fitted) , The mirrors will not fold out by pressing the fob.


I went for option 2 , i reckon it'll be more practical and avoids faffing around holding the lock button , if you only want to pop into your locked car to retrieve your shopping / wallet whatever.

I'm really chuffed i've finally got this done and at last have found a solution that works. VAG-Can-Pro is a far more powerful tool than VAG-COM / VCDS .
Although VCDS is far more user friendly and can re-code modules is a well structured and more 'guided' way , it cant actually reprogram the module firmware like VAG-Can-Pro can.

Lee


Congratulations on finally getting remote folding mirrors, do you know the security access code used for entering the driver’s door module?
denonamp
 
Posts: 3
Joined: Sat Oct 17, 2015 5:18 pm
Location: UK
I drive a: GT 2.0 TDI 170/184
In: Viper Green
With a: DSG box

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby uklee » Sun Oct 01, 2017 4:30 pm

No sorry , i dont
User avatar
uklee
 
Posts: 667
Joined: Thu Jun 27, 2013 5:58 pm
Location: The Midlands , UK
I drive a: GTS TDI
In: Candy White
With a: Manual box
Options: 14MY GTS TDi 177 RNS510 DAB with Dynaudio ,Parking sensors, 90% tint, Bi-Xenons, Full colour MFC, Winter Pack. MODS- De-Striped ,Reverse Camera Kit ,Power-fold Mirrors, Smokers pack ,Cruise Control, VW Cup spoiler ,VAG-COM tweeks ,LED interior light kit ,MSS Streets suspension kit ,12mm spacers

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby claudiu » Fri Nov 03, 2017 1:54 pm

Lee[/quote]

Congratulations on finally getting remote folding mirrors, do you know the security access code used for entering the driver’s door module?[/quote]

VCP is using one touch function to change the door controller eeprom in order to make them fold and is not showing the security acces. The security access should be 04354 though.
I have genuine VCDS, VagCAN Pro for any of your programming needs in Hemel Hempstead/Watford area.
vcds.diagnostic@gmail.com
https://www.facebook.com/pg/VCDSDiagnostic/about/?ref=page_internal
http://vcds-diagnostic.simplesite.com/
claudiu
 
Posts: 9
Joined: Tue Oct 17, 2017 11:40 am
Location: Hemel Hempstead
With a: Manual box

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby Nish108GP » Fri Nov 03, 2017 1:58 pm

claudiu wrote:Lee


Congratulations on finally getting remote folding mirrors, do you know the security access code used for entering the driver’s door module?[/quote]

VCP is using one touch function to change the door controller eeprom in order to make them fold and is not showing the security acces. The security access should be 04354 though.[/quote]Hi Claudiu

The vcp one click process does not work. code is still required. 04354 does not work.

Sent from my SM-A520F using Tapatalk
Nish108GP
 
Posts: 15
Joined: Tue Aug 15, 2017 7:02 pm
I drive a: GT 2.0 TSI
In: Silver Leaf
With a: Manual box

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby Nish108GP » Mon Dec 04, 2017 8:35 pm

Hi Guys

Has anyone been successful in sourcing the code? 04354 does not work!

Sent from my SM-A520F using Tapatalk
Nish108GP
 
Posts: 15
Joined: Tue Aug 15, 2017 7:02 pm
I drive a: GT 2.0 TSI
In: Silver Leaf
With a: Manual box

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby Nish108GP » Mon Feb 05, 2018 3:43 pm

Hi Guys

I was finally able get this working. The code is indeed 04354. You have to choose engineering mode in VCP.

At first it appeared to be unsuccessful, but after clearing all faults it worked fine. Please ensure that the mirror dial is set to "L" or "R"
Nish108GP
 
Posts: 15
Joined: Tue Aug 15, 2017 7:02 pm
I drive a: GT 2.0 TSI
In: Silver Leaf
With a: Manual box

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby FenOMenx » Fri Apr 13, 2018 9:26 am

Nish108GP wrote:Hi Guys

I was finally able get this working. The code is indeed 04354. You have to choose engineering mode in VCP.

At first it appeared to be unsuccessful, but after clearing all faults it worked fine. Please ensure that the mirror dial is set to "L" or "R"



Hello Nish108GP, you used Genuine VCP ??*
Il have a crack VCP (5.5.1) And I have an error when I try to access with 04354 .

Buying an original cable could solve my problem?
FenOMenx
 
Posts: 9
Joined: Fri Sep 22, 2017 10:45 am

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby Nish108GP » Fri Apr 13, 2018 9:35 am

FenOMenx wrote:
Nish108GP wrote:Hi Guys

I was finally able get this working. The code is indeed 04354. You have to choose engineering mode in VCP.

At first it appeared to be unsuccessful, but after clearing all faults it worked fine. Please ensure that the mirror dial is set to "L" or "R"



Hello Nish108GP, you used Genuine VCP ??*
Il have a crack VCP (5.5.1) And I have an error when I try to access with 04354 .

Buying an original cable could solve my problem?
Hello

Yes this is correct. I was unsuccessful with the clone. The original worked 100%

Sent from my SM-A520F using Tapatalk
Nish108GP
 
Posts: 15
Joined: Tue Aug 15, 2017 7:02 pm
I drive a: GT 2.0 TSI
In: Silver Leaf
With a: Manual box

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby FenOMenx » Fri Apr 13, 2018 10:06 am

Awesome, Thank you !

I ordered my original cable for that purpose ...
I was afraid to have it ordered for nothing!

Thank you very much I am reassured :).
out of stock Until April 15th! > <

Quiiiiiiiiiiick :p
FenOMenx
 
Posts: 9
Joined: Fri Sep 22, 2017 10:45 am

Re: Power mirror fold using the fob ? EDIT -You need Vag Can

Postby wow45 » Sun May 20, 2018 12:43 pm

Hy guys where did you buy you're VCP ? Thanks
wow45
 
Posts: 8
Joined: Fri Feb 10, 2017 10:03 pm
I drive a: GT 2.0 TDI 170/184
With a: Manual box

Previous

Return to Tech Talk

Who is online

Users browsing this forum: No registered users and 32 guests