Hi Guys had the car in for a service today and also booked in for a couple of repairs before the warrantee runs out in a few weeks. We had noted that the corners of the climate temperature readout display had started to "craze" on the corners back in February and we mentioned it to our local dealer, who like us assumed that there was a failure in the manufacturing process. We decided to hang fire and wait until a service was due and get them done together, we booked them both in together for today, so we were a bit peed off when today the dealer advised that the repair was not a failure but damage !!!
has anyone else had or seen something similar to the problems / faults in the attached photo, any help would be appreciated
Thanks
Nerker
Dash Problems
-
- Posts: 1
- Joined: Tue Sep 19, 2017 5:55 pm
- I drive a: GT 2.0 TDI 140/150
- In: Candy White
- With a: Manual box
Dash Problems
You do not have the required permissions to view the files attached to this post.
- Roy_01
- Posts: 1695
- Joined: Sat Dec 27, 2014 6:51 pm
- I drive a: 2.0 TDI 140
- In: Sumatra
- With a: DSG box
Re: Dash Problems
No thats not normal wear. Have you cleaned it with some agressive stuff?
If not then it must be a fabrication fault.
If not then it must be a fabrication fault.