Facelift xenon retrofit (AFS, dyn. & static cornering)

Talk about general things related to the new VW Scirocco in here.

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Roy_01 » Wed Apr 26, 2017 8:07 am

Thanks Phil! Really happy with it after 3 months time/effort.
Hopefully it's usefull for other people that want to do it.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1392
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Roy_01 » Wed May 17, 2017 8:47 pm

Tonight i managed to solve the last little problems with some help, turn lights fault and fog light left on with drl.
It needs byte 18 module 09 to be coded to 00 before you can setup the lightoutputs with vcp.
Then just select the light outputs that are not functioning right. Just in the picture below. We made a backup of the light settings before changing.
On mine the front turnlights gave a check lights fault code. We just unchecked the front turnlights diagnostic checkbox. And fault dissapeared.
Also the left rear fog light was lighted with drl on. We selected the left rear fog and unchecked the checkboxes parking light/coming/leaving home, only rear fog light checkbox was left on.
After that everything functioned fine.

If you want to connect the sidelights and drl functioning like original then you have to set the dimming of DRL and sidelights to 2 with VCP programmer.
In module 09 check byte 27 bit 2 with vcds: Led daytime running light module for parking light and DRL.

Image
Image
Last edited by Roy_01 on Sun Aug 05, 2018 10:44 am, edited 2 times in total.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1392
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby ben3runwilson » Fri May 19, 2017 10:35 am

I need to change my BCM 5K0937087AB with keyless entry. Is this an easy thing to do? I understand it's not plug and play. I have VCDS. Is there any instructions I can follow to program my keyless entry and push to start system? It's for a 2015 Scirocco R. Obviously I don't want to screw this up as this part isn't cheap. Thanks


Sent from my iPhone using Tapatalk
ben3runwilson
 
Posts: 43
Joined: Mon Jul 25, 2016 6:28 pm
I drive a: Scirocco R
In: Oryx White
With a: DSG box
Options: Recaro Wingback seats
Dynoaudio
90% Tint

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Roy_01 » Fri May 19, 2017 2:33 pm

Sorry i don't know, i don't have keyless entry or start-stop button. Maybe you can find something on the internet.
If you don't want to screw anything up best way is to let a dealer change it. And you get the right module right away.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1392
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby ben3runwilson » Fri May 19, 2017 2:34 pm

Yeah the dealer charged £350 for the part and £150 to fit... Quite a pricey bit of kit


Sent from my iPhone using Tapatalk
ben3runwilson
 
Posts: 43
Joined: Mon Jul 25, 2016 6:28 pm
I drive a: Scirocco R
In: Oryx White
With a: DSG box
Options: Recaro Wingback seats
Dynoaudio
90% Tint

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby mrsavvy90 » Fri Sep 01, 2017 8:29 pm

Scirocco61 wrote:Im purchasing the same the OEM Bi Xenon LED DRL AFS Headlights myself, have you managed to successfully complete yours? if you have it would be great if you could show me how too do it or no anybody near Enfield, North London who could install these for me. I would obviously have to purchase the rest of the parts. I looked at that thread but he doesn't mention quality and i went onto AliExpress and found the ones he said he purchased but the seller said they won't fit RHD not too sure why though.



hi mate , im located in north london / enfield have you managed to do this ? i was thinking to buy the ali express one too !
mrsavvy90
 
Posts: 24
Joined: Sat Jul 15, 2017 10:07 pm
I drive a: R-Line
In: Candy White
With a: DSG box
Options: Leather seats , Xenon Headlights, Reverse camera, Upgraded PREMIUM Audio, RNS 510 SATNAV rear parking sensors

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby nazpatel » Sun Feb 04, 2018 1:03 pm

Hi roy, quick question for you,Would changing from pre facelift to facelift xenons be as involving as this or would it be easier? I have factory installed bi xenons on my 2011 and if it not as hard to do then I’ll be looking to upgrade my lights to facelift ones?

Thanks in advance
nazpatel
 
Posts: 67
Joined: Wed Dec 29, 2010 6:37 pm
I drive a: GT 2.0 TDI 170/184
In: Candy White
With a: Manual box
Options: bi-xenons
winter pack
truffle leather
pano roof
19' black lugano & styling pack
parking sensors.

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Roy_01 » Sun Feb 04, 2018 1:38 pm

Hi!
It's not needed to change your headlights the pre-facelift ones have the same size.
And these new units are also hard to find.
Also you have to swap BCM for MY10-14 and setup the lights with VCP.
And also you will need a new AFS unit that support dynamic cornering.
The wiring for the led drl has to be connected to the headlight and indicators are in the bumper.
So quit a lot of work. Easier to leave the DRL in the bumper, but you need new aftermarket units that fit the new bumper. There are some other topics about this conversion of bumper only without facelift xenon. See: Tom Fakelift topic or Jimijokela they have it setup this way.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1392
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Jaspreet11 » Fri Feb 09, 2018 3:57 pm

Hi, is there anyone on here living in the midlands area? who can assist me with my OEM pre-facelift Bi-xenon and DRL conversion? I have all the parts, just need help installing..

Many thanks in advance
Jaspreet11
 
Posts: 5
Joined: Mon Jan 22, 2018 7:00 pm
I drive a: GT 2.0 TSI
In: Candy White
With a: Manual box

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby mvb12 » Sat Feb 10, 2018 7:46 pm

@jaspreet11 PM me
mvb12
 
Posts: 95
Joined: Mon Apr 18, 2016 6:31 pm
I drive a: Scirocco R
In: Pure White
With a: DSG box

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Jaspreet11 » Mon Feb 12, 2018 11:16 pm

mvb12 wrote:@jaspreet11 PM me


I haven't got that facility yet lol! It says i need to be involved in the forum more to have the facility. Can you email me on jaspreetsm9@gmail.com and we can exchange details via there.

Many thanks mate
Jaspreet11
 
Posts: 5
Joined: Mon Jan 22, 2018 7:00 pm
I drive a: GT 2.0 TSI
In: Candy White
With a: Manual box

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Marius336 » Sat Mar 03, 2018 6:48 pm

Hi,
i just bought 2 facelift xenon. I Allrady have pre facelift xenon in my car and i have an 087 AB BCM.

I only have to change the wiring from my existing xenon?
Marius336
 
Posts: 41
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Roy_01 » Sun Mar 04, 2018 10:29 am

- Wiring, facelift headlights work with canbus for height control/dynamic/static cornering light and DRL has to be connected.
- New AFS unit for dynamic/static cornering lights,
- Coding with VCP and VCDS

But if you only want high/low beam and drl then you can also make it work with your current setup. But you will lose the height control.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1392
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Marius336 » Sun Mar 04, 2018 1:12 pm

thank you, i want to have the dynamic conering.

So i can keep my existing sensors for the height control?

Roy_01 wrote:- Wiring, facelift headlights work with canbus for height control/dynamic/static cornering light and DRL has to be connected.
- New AFS unit for dynamic/static cornering lights,
- Coding with VCP and VCDS

But if you only want high/low beam and drl then you can also make it work with your current setup. But you will lose the height control.
Marius336
 
Posts: 41
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Roy_01 » Sun Mar 04, 2018 1:17 pm

Yes but the this AFS only uses the rear sensor so other will have no function.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1392
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby FenOMenx » Fri Apr 06, 2018 9:12 am

Wow ! :eyepop:
Awesome !

i did a big project on my R scirocco 2011. Complete Ass Facelift, I coded the lights with the VCP they work perfectly.

I knew how to mount the Facelift xenon on Halogen or Xenon scirocco (not R).
I mounted them mounted on my Scirocco R, it works '' good '' ...
(The connection of the wires is different on an R because the flashing lights are in the optics, and the DRL has 3 wires.
I had a lot of trouble doing the led strip on the R.)

But the led strip remains lit in full power even when the xenon is on ... *
It's not that I do not like, but the poor driver who is in front ...

I try a lot of things but nothing helps :(.

I saw that you post the details on the Xenon PIN Facelift,
Would you have the same thing for xenon no facelift?


Do you know how to connect them to a scirocco R in order to recover the decrease of integrity of the led strip when the xenon is turned on?

Thank you very much.
FenOMenx
 
Posts: 9
Joined: Fri Sep 22, 2017 10:45 am

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Roy_01 » Fri Apr 06, 2018 6:47 pm

Hi thanks! Couln't have done it with the people of this forum.
How have you wired your lights right now?
If you wire them following the VW diagrams and the same as the pinout diagram i posted then you have to set them up with Vag Can Pro also.
First byte 18 module 09 has to be set to 00 with VCDS. But i think yours is already on this value.
Then setup side marker lights (A44, C26) and DRL (C4, A26) for both functions. DRL and sidelight dimming has to be set to value 2.
In module 09 check byte 27 bit 2 with vcds: Led daytime running light module for parking light and DRL.
I haven't done this myself, first doing some other mods.

Image
Image
Last edited by Roy_01 on Sun Aug 05, 2018 10:46 am, edited 2 times in total.
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1392
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby FenOMenx » Tue Apr 10, 2018 7:58 am

So, trying to mount the xenon facelift on the scirocco R as on a scirocco no R it does not work (at the time I did not have a VCP)
Suddenly, the led strip served as a flashing.

I removed the pin 12 (which serves as a flashing on the R),
Install "AliExpress" DRLs that Flash (because DRLs from the Origin R do not do this)

Connect pin 8 and 10 together and I connected everything I do not remember the exact connection, it's been the month that I did the editing I watch tonight and I send you photos.

Do you have the diagram on hand? I can not find it on dropbox :(
I think that now that I am equipped with the VCP I will be able to do a "normal" editing ...

I admit to being a little lost :(



(ps: Also for some days I have the cornering lights (AFS) which goes into default (which is normal when passing xenon V1 to V2, without changing the rest)
But I disabled the surveillance with the VCP it was top !, but here it is income.
Even when turning off the turn / dynamic lights on VCDS / VCP the indicator stays> <)

Can you add me on Facebook Messenger so that we can discuss more fluid ways?

https://www.facebook.com/pheno.menx.9

Thank' you !!
FenOMenx
 
Posts: 9
Joined: Fri Sep 22, 2017 10:45 am

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby Roy_01 » Tue Apr 10, 2018 4:14 pm

The flashing can also be caused by not setting up the dimming of the drl with VCP
Pin 8 is for the small square leds. I think you mean pin 10 and 12.
See the link below for the diagrams it's on there.
Just connect the wiring as it should be and it will work normally except the drl with dimming.
Start with one thing at a time.
Im sorry i don't have Facebook, i only react to this thread when i am able.

https://www.dropbox.com/sh/nerw5cwkh9ug ... y_2008.pdf
|TPMS reset button|Gen3 climatronic|Polar FIS PF03|Bearlock|Staging color mfd|Rear view cam|Heated seats|Lane/Side/HB-assist|Fatigue detection|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|
User avatar
Roy_01
 
Posts: 1392
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Facelift xenon retrofit (AFS, dyn. & static cornering)

Postby FenOMenx » Wed Apr 11, 2018 7:54 am

I misspoke,
My led works perfectly well,
when I was talking about flashing I was talking about turning lights ...

I would just like to be able to recover the intensity reduction when xenon lights up,

Regarding my connection I did it a long time ago without tutorial.
I had as reference that for non R.

Regarding my connection:
I removed the pin 12, and I connected it to the flashing of my DRL of the bumper

I added 3 Cable, the 8 and 10, and I put one in the 12, the 3 are plugged into the power supply of the DRL of the bumper.

Without this modification of PIN 12 it was impossible to turn them on (at least without VCP, because at the time I did not have a VCP)

Thank you very much for the diagram!
FenOMenx
 
Posts: 9
Joined: Fri Sep 22, 2017 10:45 am

PreviousNext

Return to General Scirocco Talk

Who is online

Users browsing this forum: chakkums, cirkz, Google Adsense [Bot] and 41 guests