Marius Rocco

The place to share pictures and impressions of your new arrival or just show off your motor.

Re: Marius Rocco

Postby JoeSmith26 » Sun Mar 03, 2019 7:18 pm

Marius, would you be able to make a detailed guide on the installation of the discover media unit? Ive been searching for about 2 hours, and can't find much. I've just bought a unit with CP activated as it seemed better value (big mistake) so i understand that I cannot patch it, and have to get VW to remove CP, but in the process they deactivate all the features. So, the only route I can see is to:
1. Replace the old Can gateway to one with access to 5F (7N0 907 530 AM/AN/AH/AK/AL/AJ/AG)
2. Install the headunit,
3. Go to VW dealership and ask them to remove CP.

If you could either correct me, or list some steps, then that would be great.
JoeSmith26
 
Posts: 1
Joined: Fri Nov 30, 2018 3:21 pm
I drive a: GT 2.0 TDI 170/184
In: Deep Black
With a: DSG box

Re: Marius Rocco

Postby Marius336 » Sun Mar 03, 2019 8:44 pm

i buy my DM from VCDSWorkx compleat with CP remove and all things. Appconect, voice control.
https://www.facebook.com/VcdsWorkx/

i have 7n0 BC gateway, because of the assists. that alrady support 5f.

VW will not remove CP, at least here in germany not....
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Marius336 » Tue Mar 12, 2019 11:33 am

I chnage the old stalks to new Passat MQB stalks, also i now have Cruise Controll on steering wheel.
Image

Image

Image

Image
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Roy_01 » Sat Mar 16, 2019 3:01 pm

Looking great! Is that a custom steering wheel control module or canbus interface?
|Direct TPMS|Gen3 clima|Polar FIS PF03|Bearlock|Staging color mfd|RV-cam|Heated seats|Lane/Side/Fautigue/Front/HB-assist|Dyn+stat.cornering xenon|Facelift front|Seatdrawers|Door warning/handle/ambient LED|Alarm|BMC CRF797|Wagner IC|Adaptive cruise|
User avatar
Roy_01
 
Posts: 1559
Joined: Sat Dec 27, 2014 6:51 pm
I drive a: 2.0 TDI 140
In: Sumatra
With a: DSG box
Options: |Keyfob fold mirrors|pano roof|18"detroit|remap 225 hp 435 Nm|DSG remap new shiftpoints|Bonnet mono-strut|Washer fluid level sensor|DSG paddle extensions|Usb dock|Dectane KV41KLRSY|EGR disabled|Kenwood DNX525|Calearo DAB+|CC|Vcds mods|R32 brakes|Eibach B12 Pro Kit|GT1749VC|

Re: Marius Rocco

Postby Marius336 » Sat Mar 16, 2019 3:31 pm

the modul is from spacewalker

it translate the Steering wheel button data in the old stalk data, so the ECU can understand it.
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Marius336 » Tue Apr 09, 2019 3:52 pm

got the new wheels on. But i think the Tirepressure is wrong, because the the reciver is in thge wrong spot
Image

Image

Image
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Marius336 » Sun May 05, 2019 8:05 pm

Finaly i got the R bumper on.
Image

Image
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby vladandrei51 » Mon May 06, 2019 6:26 am

Hi Marius,

Dope car. What springs are you using? :D
User avatar
vladandrei51
 
Posts: 60
Joined: Thu Jun 21, 2018 9:19 am
I drive a: 1.4 TSI 160
In: Night Blue
With a: Manual box
Options: REVO Stage 2
Wossner Forged Pistons
Fox Sportauspuff Quad-Exhaust
VWR VW Racing CAI
3" catless downpipe & 3" catback (custom)
S3 intercooler
De-Cat / De-Res
03C906036M Injectors
NGK BKR7EIX Spark Plugs
NGK U5002 48003 Coil Pack
Revised Timing-Chain

Re: Marius Rocco

Postby Marius336 » Mon May 06, 2019 10:36 am

vladandrei51 wrote:Hi Marius,

Dope car. What springs are you using? :D


Coilovers. Vmaxx, not the best, maybe i change to KW.
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Rune9019 » Mon May 27, 2019 7:57 pm

Marius336 wrote:Got my rear painted.
Image
new Wheel
Image
And Cluster Update
Image


Does your tailgate open by the logo, and if it does, how did you do it?
Rune9019
 
Posts: 13
Joined: Mon Mar 11, 2019 3:34 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Marius336 » Tue May 28, 2019 7:47 am

Yes it do.
i pull one wire from Tailgate to the BCM. Plug A Pin 13
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby davidscirocco » Wed May 29, 2019 2:38 pm

@marious336 have you manage to make the turbo cluster work?
Image
User avatar
davidscirocco
 
Posts: 357
Joined: Sat May 09, 2009 7:47 am
I drive a: 1.4 TSI 160
In: Candy White
With a: Manual box
Options: panorama tilting roof, electric
"interlagos" alloy wheels
sport pack
RCD 510
air-contition Climatronic with dual- zone climate control, left and right side separately controllable

Re: Marius Rocco

Postby Marius336 » Wed May 29, 2019 7:29 pm

yes, i got this activated by a chip tuner.
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby vladandrei51 » Thu May 30, 2019 6:57 am

Marius336 wrote:the modul is from spacewalker

it translate the Steering wheel button data in the old stalk data, so the ECU can understand it.

Could you please elaborate on this?

I have a mk5 golf-like steering wheel with no buttons on it and today is supposed to arive my R-line steering wheel. I'm wondering what I can do to make the buttons + illumination work
User avatar
vladandrei51
 
Posts: 60
Joined: Thu Jun 21, 2018 9:19 am
I drive a: 1.4 TSI 160
In: Night Blue
With a: Manual box
Options: REVO Stage 2
Wossner Forged Pistons
Fox Sportauspuff Quad-Exhaust
VWR VW Racing CAI
3" catless downpipe & 3" catback (custom)
S3 intercooler
De-Cat / De-Res
03C906036M Injectors
NGK BKR7EIX Spark Plugs
NGK U5002 48003 Coil Pack
Revised Timing-Chain

Re: Marius Rocco

Postby Marius336 » Thu May 30, 2019 6:46 pm

dont work with 1k0 steering wheel modul.

my car alrady have 5k0 steering wheel module, so the new E steering whell works without moule.

The module is onle for the Cruise Controll buttons.
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Rune9019 » Fri May 31, 2019 8:53 am

Marius336 wrote:dont work with 1k0 steering wheel modul.

my car alrady have 5k0 steering wheel module, so the new E steering whell works without moule.

The module is onle for the Cruise Controll buttons.


Would that steering wheel control unit work on a red mfd?

And is it this part you're talking about when saying 5k0 and not 1k0?
https://www.ebay.com/itm/VW-OEM-steerin ... 0985389335
Rune9019
 
Posts: 13
Joined: Mon Mar 11, 2019 3:34 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Marius336 » Sat Jun 01, 2019 7:53 pm

Scirocco under 2010 have 1k0 Clockspring. Scirocco Over 2010 have 5K0 953 569 Clockspring.


if you want tu use a new steering wheel on 1k0 Clockspring, you need:
1K0-959-653-C and 1K0-959-653-D

and you need new Steering controll module:
1K0-953-549-CD/CH/CK

With this setup, the MK6 Steering wheel and the Scirocco Facelift wheel will work.

there is only the Problem with the Scirocco Facelift steering wheel, that the light dont work. Maybee google will help for that, Google: MK5 MK7 steering wheel lighting. You have to solder a smal bride so the light will work.

5k0 Clockspring everything works plug and play. But the conversion from 1k0 to 5k0 is hard.
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Rune9019 » Sun Jun 02, 2019 9:17 am

Marius336 wrote:Scirocco under 2010 have 1k0 Clockspring. Scirocco Over 2010 have 5K0 953 569 Clockspring.


if you want tu use a new steering wheel on 1k0 Clockspring, you need:
1K0-959-653-C and 1K0-959-653-D

and you need new Steering controll module:
1K0-953-549-CD/CH/CK

With this setup, the MK6 Steering wheel and the Scirocco Facelift wheel will work.

there is only the Problem with the Scirocco Facelift steering wheel, that the light dont work. Maybee google will help for that, Google: MK5 MK7 steering wheel lighting. You have to solder a smal bride so the light will work.

5k0 Clockspring everything works plug and play. But the conversion from 1k0 to 5k0 is hard.


So if i want the mfsw buttons to work, i will need -
1K0-959-653-C
1K0-959-653-D
1K0-953-549-CD/CH/CK

Right?

Lets say i want to upgrade my cluster to a facelift version further down the line - would the multifunction buttons still work with that display?
Rune9019
 
Posts: 13
Joined: Mon Mar 11, 2019 3:34 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Marius336 » Sun Jun 02, 2019 12:08 pm

yes the buttons will work.


i made a mistake in my last post: its 1k0 959 653 C ORE D not both
Marius336
 
Posts: 125
Joined: Tue Feb 23, 2016 1:32 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

Re: Marius Rocco

Postby Rune9019 » Sun Jun 02, 2019 12:43 pm

Marius336 wrote:yes the buttons will work.


i made a mistake in my last post: its 1k0 959 653 C ORE D not both



Oh okay, and i guess with 1K0-953-549-CD/CH/CK It wont matter if it ends in CD, CH or CK?
Rune9019
 
Posts: 13
Joined: Mon Mar 11, 2019 3:34 pm
I drive a: 1.4 TSI 122/125
In: Deep Black
With a: Manual box

PreviousNext

Return to The Showroom

Who is online

Users browsing this forum: Marius336, Roy_01 and 15 guests